Download and Install Hydrogen OS for OnePlus 3 : Good news for all One plus 3 fans the official Stock Hydrogen OS is now available for the all Oneplus 3 smartphone. OnePlus has ended their partnership with Cyanogen mode. OnePlus 3 mobile has 5.50 inch display powered by 1.6GHz processor with 6GB RAM and 16 MP rear camera. It also have Optic AMOLED capacitive touchscreen with Corning Gorilla Glass 4 along with Qualcomm MSM8996 Snapdragon 820 has 6 GB RAM with 64 GB internal memory with 3000 mAh battery.
How to Download and Install Hydrogen OS on OnePlus 3
Kindly Note: If you have enable bootloader and install TWRP Recovery go to step 7 directly
Step 1: Before starting you must backup all of your data to your pc. Backup all the application, photos, music, and all other important data you might have on your device.
Step 2: Now charge your Mobile phone to 80% to ensure safety for you device.
Step 3: Enable Developer Options in you Android device Just tap the Build Number 7 times in setting in About Phone option. Now in Developer option Enable Usb Debugging and OEM Unlocking options. Now you can connect your device to your PC using a Usb cable.
Step 4: Now download Minimal ADB and Fastboot from here and unlock Bootloader first from here and download TWRP Recovery from here
Step 5: Extract the Minimal ADB Setup on your PC and move the downloaded TWRP Recovery to the ADB Folder.Now rename the TWRP img file to Recovery.img and Connect your Phone to PC.
Step 6: Now open the ADB Folder in C drive and open Command Window by pressing Shift Key + Right Mouse Click.
Reboot the phone into Bootloader and type the Command
adb reboot bootloader
Now the device will boot into Bootloader After that type this command
fastboot devices
Nowflash the recovery by typing this command
fastboot flash recovery recovery.img
After that reboot your device and type the command
fastboot reboot-bootloader
Download and Install Hydrogen OS on OnePlus 3
Step 7: Now download Hydrogen OS from here and Gapps for Hydrogen here and H2OS Debloater with SuperSu from here
Step 8: Plug your device with pc and save all three file in your internal memory of your mobile phone
Step 9: Create a backup for your safety and make a factory reset along with Wipe cache, Dalvik cache, and data and swipe.
Step 10: Now in Boot menu select your custom Rom zip file Install the ROM file along with H2OS Debloater with SuperSu and Gapps for Hydrogen. Now again Wipe cache, Dalvik cache, and data and swipe.
Step 11: Just Restart your device and enjoy you have successfully install Hydrogen OS in your device. Thanks XDA Member Yash98 for providing Hydrogen OS.
Source Via –XDA
Please Note :We are Not Responsible for Any Damage of your Phone.
If you have any difficulty with the installation process, leave a message in comment section below e will help you.
No comments:
Post a Comment